SWOOP CITY 28 WOMAN Anleitung Seite 51

5. Adjust the balance with the spring.
Spring Tension
Adjustment Screw
6. Depress the brake lever about 10 times as far as the grip to check that
everything is operating correctly and that the shoe clearance is correct
before riding the bike.
CHECK YOUR BRAKES
Press each brake lever to make sure that there is no binding and that the
brake pads press hard enough on the rims to stop the bike. The brake
pads should be adjusted so they are 1 mm to 2 mm away from the rim
when the brakes are not applied. Brake pads should be centered on
the rim and "toed-in" so the rear portion of each brake pad is about 0.5 -
1.0 mm farther from the rim than the front portion of the brake pad.
Spring Tension
Adjustment Screw
Depress about
10 times
Do not ride the bicycle until the brakes are functioning properly. To
test, apply the brakes while trying to push the bike forward to make
sure they will stop the bicycle. Never ride a bicycle that is
not functioning properly.
Do not lock up brakes. Sudden or excessive application of the front
brake may pitch the rider over the handlebars, causing serious injuiy or
death. When braking, always apply the rear brake first, then the
front.
Brake pad aligned with the rim surface
Direction of rim rotation
20
Pad and rim should be parallel
When replacing friction
components, use only
components approved by the
importer or the manufacturer.