SWOOP CITY 28 WOMAN Anleitung Seite 39

3. Steering
• Ensure handlebar and stem are correctly adjusted and
tightened, and allow proper steering.
• Ensure that the handlebars are set correctly in relation to the
forks and the direction of travel.
• Check that the headset locking mechanism is properly adjusted
and tightened.
• If the bicyde is fitted with handlebar end extensions, ensure
they are properly positioned and tightened.
4. Chain
• Ensure chain is oiled, clean and runs smoothly.
• Extra care is required in wet or dusty conditions.
5. Bearings
• Ensure all bearings are lubricated, run freely and display no excess
movement, grinding or rattling.
• Check headset, wheel bearings, pedal bearings and bottom
bracket bearings.
6. Cranks and Pedals
• Ensure pedals are securely tightened to the cranks.
• Ensure cranks are securely tightened to the axle and are not bent.
7. Derailleurs
• Check that front and rear mechanisms are adjusted and function
properly.
• Ensure shift and brake levers are attached to the handlebar, shift
and brake.
• Ensure dérailleurs, shift levers and shift and brake cables are properly
lubricated.
8. Frame and Fork
• Check that the frame and fork are not bent or broken.
• If either are bent or broken, they should be replaced.
9. Accessories
• Ensure that all reflectors are properly fitted and not obscured.
• Ensure all other fittings on the bike are properly and securely
fastened, and functioning.
• Ensure the rider is wearing a helmet.
10. Motor Drive Assembly and Throttle
• Ensure all motor drive components are correctly mounted and
functioning properly.
11. Battery Pack
• Ensure the batteries are in good operation condition and kept fully
charged.
Remember to use appropriate spares (tyres, tubes, brake friction
components etc.) for the bike. Contact the importer if you do not know
what kind of spares to use. In safety critical components, use only genuine
replacement parts which are approved by the importer or the
manufacturer.
8