2. While holding the shoe against the rim, adjust the amount of shoe
protrusion by interchanging the position of the B washers (i.e. 6 mm
and 3 mm) so that dimension A is kept at 39 mm or more.
39mm or more
A
3mm Washer B
Washer A
Shoe Fixing Link
6mm Washer B
Shoe Fixing Nut
Washer
Washer A
3. While holding the shoe against the rim, tighten the shoe fixing nut.
5mm Allen Key
4. Pass the inner cable through the inner cable lead. Set the cable with
a clearance of 1mm between each brake pad and the rim, tighten the
cable fixing bolt.
19
Shoe Fixing Nut
5mm Allen Key