Troubleshooting - Gardol GEM-E 1742 Originalbetriebsanleitung

All manuals and user guides at all-guides.com

11. Troubleshooting

Fault
The motor fails to a) The capacitor is defective
start
b) There is no electricity at the plug
c) The cable is defective
d) The combined switch/plug is de-
e) The connectors have become
f) The mower is standing in high
g) The mower housing is clogged
The motor perfor- a) The grass is too high or too damp
mance drops b) The mower housing is clogged
c) The blade is severely worn
Cutting is irregular a) The blade is worn
b) Wrong cutting height
Important! For protection, the motor is equipped with a thermal switch which cuts out when
the motor is overloaded and switches on again automatically after a short cooling period.
Anl_GEM_E_1742_SPK7-1.indb 27 Anl_GEM_E_1742_SPK7-1.indb 27
GB
Possible causes
fective
separated from the motor or the
capacitor
grass
- 27 -
Remedies
a) The mower housing is clogged.
Have repaired by the Customer
Service Center
b) Check the cable and the fuse
c) Check the cable
d) Have repaired by the Customer
Service Center
e) Have repaired by the Customer
Service Center
f) Start in low grass or on an area that
has already been mowed; change
the cutting height if necessary
g) Clean the housing so that the blade
moves freely
a) Correct the cutting height
b) Clean the housing
c) Replace the blade
a) Replace or resharpen the blade
b) Correct the cutting height
26.11.2019 06:24:27 26.11.2019 06:24:27