Electrical Safety; Residual Risks - Grizzly ERM 1642 Trike Originalbetriebsanleitung

All manuals and user guides at all-guides.com

Electrical Safety:

• Ensure that the mains voltage
matches the specifications on
the rating plate.
• Connect the equipment only
to a socket that has a residual
current operated device (RCD
switch) with a trip current of no
more than 30 mA.
• Avoid bodily contact with
earthed parts (e.g. metal fenc-
es, metal posts). There is an
increased risk of electric shock
if your body is earthed.
• Use only authorised power ca-
bles of H05RN-F, which are no
more than 75 m long and suita-
ble for outdoor use. The power
cable wire cross section must
be at least 2.5 mm
completely unroll cable drums
before use. Check the cable for
damage.
• To fix on the power cable, use
the cable suspension intended
for the purpose.
• Keep the power cable away
from the cutting tool when
working. The cutting blades
may damage the power cable
and result in contact with live
parts. Always run the power
cable behind the operator.
The extension cable can be
accidentally severed. Risk of
electric shock!
• Do not use the power cable to
pull the plug from the socket.
Protect the power cable from
heat, oil and sharp edges.
• Switch off the equipment and
disconnect the plug from the
socket if the power cable is
. Always
2
damaged. If the power cable is
damaged, it must be replaced
by the manufacturer, the cus-
tomer services of the same, or
a qualified person, in order to
avoid hazards.
• Do not connect a damaged
power cable to the mains. Do
not touch a damaged power
cable when it is connected to the
mains. A damaged power cable
may result in contact with live
parts.

Residual risks

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Injuries caused by moving parts;
b) Ear damage if working without ear
protection;
c) Lung damage, if suitable respiratory
protection is not worn;
d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the
risk of serious or lethal injuries, we
recommend that persons with medi-
cal implants consult their doctor and
the manufacturer of their medical
implant before operating the ma-
chine.
GB
27