Key To Symbols Key To Symbols; Explanation Of Warning Levels - Husqvarna LC 348VI Classic Bedienungsanweisung

Key to symbols
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Keep people and animals well away from
the working area.
Prevent unintentional starting by removing
the ignition cable from the spark plug.
Watch out for thrown objects and
ricochets.
Warning: rotating cutter. Keep hands
and feet clear.
Warning: rotating parts. Keep hands and
feet clear.
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter and
on the label.
Never use the machine
indoors or in spaces lacking
proper ventilation. Exhaust
fumes contain carbon
monoxide, an odourless, poisonous and highly
dangerous gas.
Risk of explosion
Always shut off the engine before
refuelling.
70 – English
KEY TO SYMBOLS
Hot surface.
Stop the engine.
Start the engine
Remove the safety switch
(battery) before performing
maintenance work or leaving
the machine unattended.

Explanation of warning levels

The warnings are graded in three levels.
WARNING!
IMPORTANT!
CAUTION!
CAUTION! Used if there is a risk of damage to materials
or the machine if the instructions in the manual are not
followed.
WARNING! Used if there is a risk of
!
serious injury or death for the operator
or damage to the surroundings if the
instructions in the manual are not
followed.
IMPORTANT! Used if there is a risk of
!
injury to the operator or damage to the
surroundings if the instructions in the
manual are not followed.
STOP STOP