Display & Controls: Midmotor Models; Buttons; Information On The Screen - Qwic PMN360 Bedienungsanleitung

Display & Controls: Midmotor models
The following controls explanation applies to the
midmotor models. Place a battery in the bike to
make use of all the display functions and the motor
assistance.
The display is provided with its own small battery, so it
can function as a normal bicycle computer as well when
there is no battery in the bike or when the battery is
empty. In this case the 'battery status indicator' bar will
be not visible.

Buttons

Switch the display ON and
OFF with the extended
'ON/OFF' button on the
back of the display.
On the bottom of the screen
there are 3 buttons:
42
PLUS MINUS
LOGO
Display & Controls: Midmotor models

Information on the screen

SPEED
Shown in kph or mph
BATTERY INDICATOR
Shown in 5 steps of 20% capacity each
RANGE
The remaining range on the current battery
Shown in km or m
SELECTION FIELD
See Selection field on page 44
LIGHTING
Indicator of enabled bicycle lighting
ASSISTANCE LEVEL
Choice of 10 levels
Maximum speed depending on level
1-2 Eco
Little motorpower
3-8 Normal
Motorpower dependent of level
9-10 Power
Extra motorpower for hilly environments