Herunterladen Inhalt Inhalt Diese Seite drucken

Qwic PMN360 Bedienungsanleitung Seite 40

Performance series
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Controlling the Walk Assist
Use the Walk Assist feature to easily take the bicycle
by the hand, for example when taking it out of
underground storage. Stand firmly next to the bike and
hold your hands on the handlebars. If a brake lever is
present, keep at least one hand on the brake where
the brake-circuit breaker (interruption of the motor
assistance) is located.
This is generally is the left brake lever. Keep the 'PLUS'
button pressed while firmly holding the handlebars. The
engine will start after a few seconds. Once you release
the 'PLUS' button the Walk Assist function switches
itself off. The Walk Assist has a speed of 3 km/h. The
Walk assist can only be used in assistance level 1 - 8.
(Screen) Lighting
Press the 'ON/OFF' button to turn on the
(screen) lighting. Press 'ON/OFF' again to turn it off
again. When you turn on the screen lighting, the front
and rear lights will automatically turn on as well. They
work on the battery as well, so no extra batteries are
required.
USB connection
The USB connection on the back of the display can be
used to provide power to devices such as smartphones
and navigation devices. It can also be used when the
system is off, if the battery is still on the bike.
40
Tire size
Set the correct tire size (mm) by pressing the 'SET'
button for 10 seconds. The pre-set sizes may deviate a
little. This means that the amount of driven kilometers
has a maximum deviation of 5%.
16 inch
20 inch
24 inch
26 inch
28 inch standard tire
28 inch balloon tire
Switch off
Press the 'ON/OFF' button for 2 seconds to turn off
the system. The control panel can only be used when
the battery is connected to the bike. If the display is
turned off while riding the bike, or when riding without
battery, it is possible that random values are displayed
as the motor generates small powerstreams. Everything
that appears on the display when the system is not
activated, can be ignored.
Display & Controls: Rearmotor models
Circumference: 1272 mm
Circumference: 1590 mm
Circumference: 1907 mm
Circumference: 2070 mm
Circumference: 2224 mm
Circumference: 2268 mm

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

P-rd9sP-mn7P-rd9

Inhaltsverzeichnis