Technical Specifications - Technaxx TX-192 Gebrauchsanleitung

Q4: Why the playback is intermittent?
A4: Due to the limited use life of the MicroSD cards, the continuous video
will largely reduce the MicroSD card life, when the device detects the
moving images, the intermittent condition could save storage space and
prolong the MicroSD card life.
Q5: The device is online and also there is motion happening in
surveillance area, but why not receiving alarm information on mobile
phone?
A5.1: Make sure that the device IP from APP is running on the mobile and
motion detection function has been enabled.
A5.2: Check if you opened the "message notification" function on your
Smartphone system.
Q6: When do NVR (TX-128 monitor) and camera need to be paired?
A6: Matching code is to make the camera WiFi connect to the NVR
automatically. You need to match code when a new battery camera needs
to be added to the NVR; The camera needs to be code matched after
being reset to factory settings;
The NVR needs to be code matched after being restored to the factory
settings; After deleting the paired cameras on the NVR channel through
the App, you need to match code again.

Technical Specifications

Image sensor
Lens
Viewing angle
Day & Night
Minimum illumination
IR distance
Rotation angle
Video resolution
Video frame rate
Video file format
Video compression
Audio source
Audio compression standard
Audio compression code stream
Speaker
3MP 1/2.9" CMOS
f=4mm, fixed focus
horizontal: 86°/ vertical: 46°
Auto. IR-cut filter
Color mode: 0.05 Lux; Night mode: 0 Lux with 6x
IR LED or 6x white LED
~15m; IR 850nm, White 4W, 200lm, 6000K
Horizontal: 0-355°; Vertical: 0-90°
HD (2304x1296), Smooth (640x360)
20fps (PAL 50Hz, NTSC 60Hz)
.TS
H.264/H.265
Built-in microphone; effective range ~15m
G726/G711A/AAC-8K16bits
Streaming self-adaptive
Built in, 8Ω 2W; effective range ~30m
Model: TX-192 Article No. 4991, 07/2022
33