Pc Software Windows (& Mac); Installation; Login And Add Device - Technaxx TX-192 Gebrauchsanleitung

The following chapter is based on Security Premium for Windows in
version 2.0.7.11
PC Software Windows (& MAC)
Attention: It is not possible to configure the camera with the PC Software!
Info: The MAC version differs from the Windows version.

Installation

→
Start the Security Premium.exe which you find under
www.technaxx.de/support --> TX-192
→ Double click on the Security Premium.exe to start the installation.
→ Choose the language and click on OK.
→ Agree to license agreement and click on I Agree.
→ Choose the path the software is installed to or keep the suggestion and
click on install.
→ Wait until the installation is completed and click on Finish. The Software
will start automatically.
Important: Maybe windows firewall pop up will show up. Select private or
public network depending on your home network. If you are not sure
choose both. Click on Allow access before going on with the Setup guide.

Login and add device

→ The PC Software starts automatically. A login window will show up. Just
click on Login to use Local login.
→→ If you want to login with your registered App account (Cloud login)
enter the email address (phone number) and the password, that you
created for registration via the App.
Note: The advantage of cloud login is that all your added devices in your
account are shown directly on the PC Software.
→→ If you choose the Local login, go to device management press on
Add device and change to Cloud ID. Enter Cloud ID (Device ID on the
device), User name (admin), password (specified camera password via
App) and Device name (freely selectable). If you already added the device
you will see it in the list on the right. Mark the added device by clicking on
it and choose Edit.
26
Model: TX-192 Article No. 4991, 07/2022