Technaxx TX-192 Gebrauchsanleitung Seite 65

Time setting
Time
synchronization
Choose time
zone
Daylight saving
time
Advanced settings
Video screen
flip
PTZ direction
flip
Video quality
settings
Privacy zone
setting
Setup password
User name
Password
Further settings
Restart the
camera
Delete and
reset the
camera
Playback
Click the button of remote
Precondition of camera remote playback:
→ Make sure the camera time is already time synchronized with the App
→ Insert the suitable MicroSD card into the camera. → enable motion
detection recording.
Remote playback function of the device then only can be used.
other operation. Note: 64 -128GB can be necessary to
format via the App! It could be necessary to format until
the App shows MicroSD status: Normal.
Time syncing between Smartphone and camera.
Time zone is set automatically. If not, adjust it here.
Enable/disable summertime. Choose country.
- Flip up and down: Enable/disable to change alignment
- Flip left and right: Enable/disable to change alignment
- Flip up and down: Enable/disable to change alignment
- Flip left and right: Enable/disable to change alignment
Change the pattern of the IR LED to infrared (IR on), full
color (white LED on) and intelligent (auto.). If you use
infrared the IR light turns off/on depending on the
brightness. If you use full color the white LEDs turn off/on
depending on the brightness.
Black out areas of the camera image that should not be
seen on the recording or in the live view.
Admin is a fixed username, cannot be changed.
Click on password to change the old password to a new
one.
Click to restart the camera.
Click to reset the camera and delete the camera from
your account.
playback in the live view.
Model: TX-192 Article No. 4991, 07/2022
22