Status Led; Reset Button; Quick Operation Guide; For Standalone Use - Technaxx TX-192 Gebrauchsanleitung

color. With the white LEDs shining at night you get colored
images/recordings at night.

Status LED

The status LED is the green LED found on the LAN connector. It has three
conditions:
Flashing fast:
Flashing slow:
Continuous:

RESET Button

Press and hold the reset button for 5 seconds to reset the device. Find the
reset button on the cable end or next to the MicroSD card slot.

Quick operation guide

For STANDALONE USE

In this mode TX-192 camera can only be configured by iOS or
Android APP!

Preparation

1. The camera needs to be connected to a power source via the included
power adapter. After connecting the power adapter with the camera and
the power socket. A recurring "beep" will sound. And the LED indicator on
the LAN port starts flashing fast. If the LED does not flash fast reset the
device.
2. Insert a MicroSD card* into the MicroSD card slot for saving recordings
(*not included).
Note: A MicroSD card should be inserted into the camera before it can be
operated. Before inserting or removing the MicroSD card, the camera
must be in OFF Mode. Failing to do so may cause loss of or damage to the
videos already recorded on the MicroSD card.
Device is in WiFi pairing mode.
Device has no WiFi connection.
Device is connected to the WiFi / LAN.
Model: TX-192 Article No. 4991, 07/2022
9