Box Contents; Use - Texas Pro Cut 460 Bedienungsanleitung

Box Contents

1. Machine (Figure 1)
2. Operating manual and motor instructions
The lawn spiker is almost ready for use. Only the handlebar needs to be fitted.
Fit the bottom handlebar using the accompanying bolts. Figure 7.
Bottom handlebar must be fitted with tension plates inside. Figure 2
Fit the top handlebar, unfold the handlebar and secure it in the required position with the
grips. See figure 3, c.

Use

Before use, follow the instructions for readying the motor in the
motor instruction manual.
Before using the machine, remove all foreign objects from the vicinity. Stones, glass,
branches and similar items can damage the machine. Also check that all bolts are
tightened.
Control oil levels before starting the motor.
Start:
Set the gas handle to choker / full gas, figure 3,a.
Follow motor start instructions.
Stop:
Set the gas handle to minimum gas, figure 3,a.
Follow motor stop instructions.
The clutch grip on the handle is used to activate the rotating blades under the machine. It
is important that the clutch allows for connection under operation, i.e. the clutch trigger is
to be held tight up against the handle.
Figure 3, b.
The rotating blades disengage automatically when the trigger is released.
Working depth can be adjusted using the position settings on the right hand side of the
machine, (figure 4, b).
The machine can be lifted to its transport position by using the handle on the right hand
side of the machine, (figure 5, a).
9