Drill Safety Warnings - Makita 6013B Betriebsanleitung

All manuals and user guides at all-guides.com
ENGLISH
(Original instructions)
1 Switch trigger
2 Lock button
3 Counterclockwise
4 Clockwise
SPECIFICATIONS
Model
Capacities
Steel ....................................................................................................... 13 mm
Wood ...................................................................................................... 36 mm
–1
No load speed (min ) ............................................................................... 550
Overall length ............................................................................................ 340 mm
Net weight .................................................................................................. 2.9 kg
Safety class ................................................................................................
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling in wood, metal and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future refer-
ence.
Explanation of general view
5 Chuck key
6 Tighten
7 Sleeve
8 Ring

DRILL SAFETY WARNINGS

1.
2.
3.
4.
5.
GEA010-1
6.
7.
8.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
9 Limit mark
10 Brush holder cap
11 Screwdriver
6013B
/II
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
Hold the tool firmly.
Keep hands away from rotating parts.
Do not leave the tool running. Operate the tool
only when hand-held.
Do not touch the drill bit or the workpiece imme-
diately after operation; they may be extremely
hot and could burn your skin.
Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
6013BR
13 mm
36 mm
550
340 mm
2.9 kg
/II
GEB001-6
3