Use Of The Appliance; Sensitive Touches; Display; Starting Up The Appliance - valberg 973735 Gebrauchsanweisung

USE OF THE APPLIANCE

Sensitive touches

Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your
finger touches the key, the corresponding command is activated. This activation is validated by
a control light, a letter or a number in the display and/or a "beep" sound.
Touch only one key on the same time.

Display

Display
0
1...9
P
L
F
H

STARTING UP THE APPLIANCE

Before using your new hob

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Starting-up
Each cooking zone turns on independently:
• Start-up/ switch off the cooking zone
Action
To start
Increase power
Decrease power
To stop
If no adjustment is made within 10 seconds the electronics return to the standby position.
If more than one cooking zone is activated, a continuous press for 6 seconds on one of the
zone selection keys [

Residual heat indication

After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched safely.
When the residual heat indicator light is on,don't touch the heating zone and don't put any heat
sensitive object on them. There are risks of burn and fire.
Designation
Zero
Power level
Booster
Locking
Error message
Residual heat
Control panel
Press key [ ]
Press key [ + ]
Press key [ - ]
Press key [ - ]
Or press key [
] will turn off the entire cooktop.
Function
The heating zone is activated
Selection of the cooking level
Booster is activated
The child lock is activated
Electronic failure
The heating zone is hot
]
20
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]