Maintenance; Maintenance Schedule; Checking Oil Level - Comprag FV Serie Bedienungsanleitung

5. Maintenance

5.1

Maintenance schedule

Maintenance schedule
Oil level
Compressor oil
Air filter
Oil filter
Ait-Oil Separator
Drive belt
Heat exchanger
Bearings of electric
motor
Intake valve
Minimum pressure
valve
Safety valve
Beyond 6000 working hours, compressor maintenance consists in alternating M-2 and M-3
every 2000 hours of running time. Performance of daily, weekly, monthly and annual servic-
ing does not annul the need for maintenance in terms of operating hours.
5.2

Checking oil level

Check oil level on a daily basis. In order to access the oil level, stop the compressor and remove the
front side panel. The oil level in the compressor should be checked visually with the oil level glass (1)
when the compressor has stopped. The surface of the oil must always be visible in the sight glass
If no oil is visible in the sight glass, the oil level is low and needs to be topped up. Using belt tension
gauge, check the tensile force of the compressor belts.
26
Daily Monthly
Check/
Refill
Cleaning
Check
Cleaning
Yearly M-1
500
Replace
Replace
Lubricate
Check
Check
Check
Interval in work hours
M-2 M-3
2000 4000
Replace Replace
Replace Replace
Replace Replace
Replace
Replace
Version 1.5
M-2
6000
Replace
Replace
Replace