Dehumidification Mode; Sleep Mode - Suntec Wellness KLIMATRONIC Coolfixx 9000 BTU Design Bedienungsanleitung

2. Functions
The device has four functions: Cooling, heating ventilation and dehumidification. For night operation, we
-
recommend that you operate the unit in sleep mode.
2.1 Cooling Mode
Please press the MODE button repeatedly until the "Cool" indicator lights up.
-
Press the up/down button to set the temperature. The temperature can be set between 16℃ and 32℃.
-
Please press the fan speed button repeatedly until the desired indicator lights up.
-
Please press the oscillation button in order to activate or deactivate the automatic vertical movements
-
of the fins.
NOTE: The air conditioner stops when the room temperature is below the set temperature.
2.2 Fan Mode
Please press the MODE key repeatedly until the "Fan" indicator lights up.
-
In ventilation mode, the room air is circulated but not cooled.
-
Please press the SPEED button to select high, medium or low speed.
-

2.3 Dehumidification Mode

Press the MODE button on the control panel or remote control until the "Dry" indicator lights up. The fan
-
speed cannot be selected. The user should connect the drainage hose to the drain at the bottom of the
unit.
Note: In this mode, the fan speed switches to Low and cannot be set.

2.4 Sleep Mode

The cooling mode can be activated in sleep mode.
In Cooling Mode:
After 1 hour the preset temperature is automatically increased by 1 ℃, after another hour the preset
temperature is automatically increased again by 1 ℃.
In Heating Mode:
After 1 hour the preset temperature is automatically decreased by 1 ℃, after another hour the preset
temperature is automatically decreased again by 1 ℃.
3. TIMER 1h-24h:
When the unit is switched on, press the TIMER button first. Now you can set the desired switch-off time
with the up/down buttons.
When the unit is switched off, press the TIMER key to set the switch-on time.
Deactivate Timer: Press the Up/Down button repeatedly until '00' appears on the display.
Note: If you press the POWER button during this time, the timer function will be deactivated.
4. Automatic Frost Protection:
At low room temperatures, frost may accumulate on the evaporator during operation. In this case, the
unit automatically starts defrosting and the POWER LED flashes. The defrost control sequence is as
follows:
When the unit is operating in cooling mode or dehumidification mode, the ambient temperature sensor
detects the evaporator coil temperature. As soon as this drops below -1°C, the compressor is switched
off. After the compressor has stopped operating for 10 minutes or reaches the coil temperature 7℃, the
unit restarts in cooling mode.
5. Overload Protection:
In the event of a power failure, there is a 3-minute delay until the compressor restarts to protect the
compressor.
Connection to the WLAN and the Suntec Wellness APP
WiFi standard
WiFi frequency
WiFi radio-frequency power (max.)
• Please download the "SUNTEC Wellness" app from the App Store or Google Play and install it.
• Please create a user account after the installation.
• Please activate the Bluetooth access in the settings of your mobile device.
• Please place the device within 5 meters of your router.
802.11B:17.5dBm;802.11g:14.5dBm;
802.11n:13.5dBm
2,400 GHz - 2,4835 GHz
＜20.0dBm