IFM Electronic A5interfoce AC1307 Montageanleitung Seite 17

O Slave setup
O Fieldbus setup (The different fieldbus interfaces are optional)
Module 1 = Digital inputs master 1A
Module 2 = Digital outputs master 1A
Module 3 = Digital inputs master 2A
Module 4 = Digital outputs master2A
Module 5 = Digital inputs master 1B
Module 6 = Digital outputs master1B
Module 7 = Digital inputs master 2B
Module 8 = Digital outputs master2B
Module 9 = Analogue multiplex input
O Fieldbus data (optional)
(Details about the connected AS-i slaves)
∇ Digital or analogue inputs/outputs of the connec-
ted AS-i slaves
∇ Current and projected parameters of the connec-
ted AS-i slaves
∇ Current and projected I/O and ID codes of the
connected AS-i slaves
∇ Message faults in the communication to the
connected AS-i slaves
∇ Input of the IP address of the controller
higher-level system
∇ Input of the Subnet Mask
∇ Reading of the MAC ID
∇ Input of the module lengths
∇ Display of the data cyclically transmitted via the
fieldbus
Module 10 = Analogue multiplex output
Module 11 = Command channel
Module 12 = PLC inputs
Module 13 = PLC outputs
Module 14 = Analog Input Master 1
Module 15 = Analog Output Master 1
Module 16 = Analog Input Master 2
Module 17 = Analog Output Master 2
Module 18 = Diagnosis
in the
e
17