Error Management And Servicing - CashConcepts CCE 5000 Bedienungsanleitung

CCE – Cash Concepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: info@cce.gmbh / Web: www.cce.gmbh

Error management and servicing

The CCE 5000 is equipped with a comprehensive error management to inform you about problems by the counting process and
the counterfeit money recognition and also for the soiling of sensors. Please note particular the tips to exclude to the cleaning of
the machine to avoid mistakes during the counting caused by dirtied sensors.
Cleaning of the sensors / Removing jammed banknotes and foreign objects
By the banknotes and by retreating dust it comes to depositions before the sensors of the machine. This pollution leads to
increased errors and non-recognitions of real banknotes.
Please, therefore, periodically clean the sensors of the CCE 5000. Turn off the machine and unplug the power cable generally
while cleaning the machine.
To clean the sensors grab with both hands in the entrance area of the banknotes (Hopper) and pull it upwards. You now have
access to the upper and lower sensor areas.
Clean this area with a soft brush and cloth and remove the dust from the sensors (yellow marked area), as well as from the
rollers. To clean the counterfeit money sensors we recommend the additional use of a non-flammable compressed air spray and
special cleaning towels for banknote counters even to remove the dirt and dust in inaccessible areas
Also clean the area, which is accessible via the rear door. Grab in the mould on the reverse side and pull it toward you.
Close the machine after cleaning. Please take care when closing that your hands are not in the moving area of the machine.
Otherwise there is a risk of bruising or other injuries.
EN
Page 12