Mechanical Settings - CashConcepts CCE 5000 Bedienungsanleitung

CCE – Cash Concepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: info@cce.gmbh / Web: www.cce.gmbh
4: DATE TIME
At this topic you can set up the date and the time which were displayed and also
printed to an optional printer.
At the subtopic "DATE FORMAT" you can set up the way how the date should be
displayed. The letters DD means the day, MM means the month and YY means
the year.
At the subtopic "DATE SET" you can set up the correct date. By pressing the
button "+1 / +10" you can increase the value by 1 (short press) or by 10 (long
press). By pressing „↑ / ADD" and „↓ / DISPLAY" you can switch between the
columns.
At the subtopic "TIME SET" you can set up the correct time. By pressing the
button "+1 / +10" you can increase the value by 1 (short press) or by 10 (long
press). By pressing „↑ / ADD" and „↓ / DISPLAY" you can switch between the
columns.
5: VERSION
Under this topic the software versions of the different parts of the CCE 5000
were displayed. This information are only important for service partners.

Mechanical settings

By transporting and wear of the transport rollers in the hopper area a readjust may be necessary. On the top side of the machine
an adjusting screw is located with which the pressure on the notes can be adjusted.
Does the CCE 5000 pull in more than one banknote at once and you got often the error: chained notes or double notes, please
turn the adjusting screw by a screwdriver in the direction of the "-" symbol.
If the notes are poor or skewed drawn in the machine, please turn the adjusting screw by a screwdriver in the direction of the
"+" symbol.
Display:
4: DATE TIME
Date Format
Date Set
Time Set
EN
Page 11