Herunterladen Inhalt Inhalt Diese Seite drucken

Take Measurement; Diagnostic Functions - Beurer BF 850 Gebrauchsanweisung

Diagnosewaage
Vorschau ausblenden Andere Handbücher für BF 850:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

8. Take measurement

8.1 Diagnostic functions

Step onto the scale with bare feet and ensure that you are standing still with equal
weight distribution and with both legs on the electrodes
Note: The measurement result will be incorrect if the measurement is taken with
socks on.
The scale begins to take measurements straight away.
First, the weight is displayed.
During the BIA analysis, "
If a user was assigned, their initials will be displayed and all of the following values will
be saved.
1. BMI
2. Body fat in %
3. Body water in %
4. Muscle percentage in %
5. Bone mineral amount in kg
6. Basal metabolic rate in kcal (BMR)
7. Active metabolic rate in kcal (AMR)
Note: If the user is not recognised, then the user assignment (initials) is missing
and only the weight can be displayed. The measured values will not be saved.
This happens if your measured weight differs from the previous measurement
by ± 3 kg or if another user has similar values (± 3 kg) to yours. In this case,
repeat the measurement by turning on the scale and pressing the " " button to
select your user memory (P-01 – P-08). Repeat the measurement.
8.2 Weight
Step onto the scale wearing shoes and ensure that you are standing still with equal
weight distribution and with both legs on the scale. The scale begins to take meas-
urements straight away.
First, the weight is displayed.
" " will briefly be displayed on the LCD. A BIA analysis is not possible.
If a user was assigned, their initials will be displayed and the weight will be saved.
Note: If the user is not recognised, then the user assignment (initials) is missing
and only the weight can be displayed. The measured values will not be saved.
This happens if your measured weight differs from the previous measurement
by ± 3 kg or if another user has similar values (± 3 kg) to yours. In this case,
repeat the measurement by turning on the scale and pressing the " " button to
select your user memory (P-01 – P-08). Repeat the measurement.
" is displayed.
18

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis