Herunterladen Inhalt Inhalt Diese Seite drucken

Electrical Connection - Novy 1724-2 Montage- Und Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

 The connection cord should be subjected, after building, with no mechanical constraint,
such for example of the fact of the drawer.
 WARNING: Use only hob guards designed by the manufacturer of the cooking appliance
or indicated by the manufacturer of the appliance in the instructions for use as suitable or
hob guards incorporated in the appliance. The use of inappropriate guards can cause
accidents.

ELECTRICAL CONNECTION

 The installation of this appliance and the connection to the electrical network should be
entrusted only to an electrician perfectly to the fact of the normative regulations and which
respects them scrupulously.
 Protection against the parts under tension must be ensured after the building-in.
 The data of connection necessary are on the stickers place on the hob casing near the
connection box.
 The connection to the main must be made using an earthed plug or via an omnipolar
circuit breaking device with a contact opening of at least 3 mm.
 The electrical circuit must be separated from the network by adapted devices, for example:
circuit breakers, fuses or contactors.
 If the appliance is not fitted with an accessible plug, disconnecting means must be
incorporated in the fixed installation, in accordance with the installation regulations.
 The inlet hose must be positioned so that it does not touch any of the hot parts of the hob
or oven.
Caution!
This appliance has only to be connected to a network 230 V~ 50/60 Hz.
Connect always the earth wire.
Respect the connection diagram.
The connection box is located underneath at the back of the hob casing. To open the cover use a
medium screwdriver. Place it in the slits and open the cover.
CONNECTION OF THE HOB FOR 1724-2 – 1726-2 – 1763-2:
Mains
230 V~ 50/60 Hz
400 V~ 50/60Hz
* calculated with the simultaneous factor following the standard EN 60 335-2-6
Connection
Supply cord
1 phase +N
3 x 2,5 mm
2 phases + N
4 x 1,5 mm
78
Supply cord
Circuit braker
H 05 VV - F
2
H 05 RR - F
H 05 VV - F
2
H 05 RR - F
25 A *
16 A *

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1726-21763-21767-2

Inhaltsverzeichnis