WIKA DI10 Betriebsanleitung Seite 20

Menu level Parameterization level
Setting the decimal point, dot:
dot
The decimal point on the display can be moved with [▲] [▼]
and confirmed with [P]. The display then switches back to
the menu level again.
Setting the display time, SEC:
SEC
The display time is set with [▲] [▼]. The display moves up
in increments of 0.1 up to 1 second and in increments of 1.0
to 10.0 seconds. Confirm the selection by pressing the [P]
button. The display then switches back to the menu level
again.
Activation/deactivation of the programming lock and
completion of the standard parameterization, run:
run
With the aid of the [▲] [▼] keys, you can choose between
the deactivated key lock ULOC (works setting) and the
activated key lock LOC. Make the selection with [P]. After
this, the display confirms the settings with "- - - -", and
automatically switches to operating mode.
If LOC was selected, the keyboard is locked. To get back
into the menu level, you must press [P] for 3 seconds in
operating mode. You must now enter the CODE (works
setting 1 2 3 4) that appears using the [▲] [▼] keys plus [P]
to unlock the keyboard. FAIL appears if the input is wrong.
20
0 0.0
0.1 0.9 then 1.0
ULOC LOC
WIKA Betriebsanleitung Digitalanzeige Typ DI10
0.00 0.000
10.0