Declaration Of Conformity; Warranty Certificate (A Summary Of The Warranty Conditions) - Oleo-Mac BC 22 Betribs- Und Wartungsanleitung

13. DECLARATION OF CONFORMITY

The undersigned, Emak spa via Fermi, 4 - 42011 Bagnolo in
Piano (RE) ITALY declares under its own responsibility that
GB
the machine:
1. Category: brushcutter/grass trimmer
2. Brand Oleo-Mac, Type BC 22 S (Model conforms to Euro 1
standards only) - BC 22 T (Model conforms to Euro 1
standards only) - BC 24 S (Model conforms to Euro 1
standards only) - DS240 T (Model conforms to Euro 1
standards only) - BC 220 S - BC 220 T - BC 240 S - BC 240 T - BC
240 D
3. Serial ID 918 XXX 0001 ÷ 918 XXX 9999 (BC 22) - 919 XXX
0001 ÷ 919 XXX 9999 (BC 24) - 920 XXX 0001 ÷ 920 XXX 9999
(BC 220) - 921 XXX 0001 ÷ 921 XXX 9999 (BC 240) - 933 XXX
0001 ÷ 933 XXX 9999 (BC 240 D)
conforms to the requirements of Directives:
2006/42/CE - 2000/14/CE - 2004/108/CE - 97/68/CE (Model
conforms to Euro 1 standards only) - 2002/88/CE (Model
14. WARRANTY CERTIFICATE
This machine has been designed and manufactured using the
most modern techniques. The manufacturer guarantees its
products for 24 months from the date of purchase, for private
and hobby use. The warranty is limited to 12 months in case
of professional use.
Limited warranty
1) The warranty period starts on the date of purchase. The
manufacturer, acting through the sales and technical
assistance network, shall replace free of charge any parts
p r o v e n d e f e c t i v e i n m a t e r i a l , m a c h i n i n g o r
manufacturing. The warranty does not affect the
purchaser's rights as established under legislation
governing the consequences of defects in the machine.
2) Technical personnel will undertake the necessary repairs
in the minimum time possible, compatible with
organisational needs.
3) To make any claim under the warranty, this certificate
of warranty, fully completed, bearing the dealer's
stamp and accompanied by the invoice or receipt
showing the date of purchase, must be displayed to
the personnel authorised to approve work.
4) The warranty shall be null and void if:
- the machine has evidently not been serviced correctly
MODEL
SERIAL No
BOUGHT BY Mr.
Do not send! Only attach to requests for technical warranties.
40
conforms to Euro 1 standards only) - 2004/26/CE, conforms to
the provisions of the following harmonized standards:
EN 55012 - EN ISO 11806
Procedures for evaluation of conformity followed:
Annex V - 2000/14/CE
Measured sound power level: 110.0 dB (A)
Guaranteed sound power level: 112.0 dB (A)
Technical Documentation deposited with Administrative
Headquarters: Technical Department
Signed in Bagnolo in Piano (RE) Italy - via Fermi, 4
Date: 30/11/2013
- the machine has been used for improper purposes or has
been modified in any way,
- unsuitable lubricants and fuels have been used
- non-original spare parts and accessories have been fitted
- work has been done on the machine by unauthorised
personnel
5) The warranty does not cover consumables or parts
subject to normal wear.
6) The warranty does not cover work to update or improve
the machine.
7) The warranty does not cover any preparation or
servicing work required during the warranty period.
8) Damage incurred during transport must be immediately
brought to the attention of the carrier: failure to do so
shall render the warranty null and void.
9) Engines of other manufacturers (Briggs & Stratton,
Subaru, Honda, Lombardini, Kohler, etc.) fitted to our
machines are covered by the warranties of the engine
manufacturer.
10) The warranty does not cover injury or damage caused
directly or indirectly to persons or things by defects in
the machine or by periods of extended disuse of the
machine resulting from the said defects.
DATE
DEALER
s.p.a.
Fausto Bellamico - President