Versions With Manometer - GF 582 Betriebsanleitung

Pressure Reducing Valve Type 582 HP High Purity
5.3

Versions with manometer

WARNING!
Leakage at pressure gauge outlet!
Risk of material damage and/or injury due to leakage at the pressure gauge outlet for versions with and without adapter.
The pressure gauge bore is drilled at the factory and fitted with a protective plug. Pressure gauge is shipped separately for transport
protection.
► Make sure that the pressure gauge is mounted before commissioning.
WARNING!
Do not adjust the pressure gauge!
Risk of material damage and/or injury due to modification of pressure gauge! Valid for versions with adapter. Pressure gauge is in-
stalled, preset and tested at the factory.
► Do not make any modifications to the pressure gauge.
► Only turn the adapter.
► Do not damage the seal label.
1. Valve with protective plug at mano-
meter outlet.
2. Install O-ring at manometer/adap-
tor.
3. Remove covering cap and turn the
manometer with/without adaptor
with threaded connection into the
valve base part.
4. Turn in manometer/manometer
with adaptor from contact, at least
360° up to max. 720° (align scale).
Maximum torque 2.5 Nm.
16
Manometer
Operating Instructions
Manometer with adaptor