Accessories And Spare Parts; Accessories; Disposal - GF 582 Betriebsanleitung

Pressure Reducing Valve Type 582 HP High Purity
10

Accessories and Spare Parts

Required information for ordering spare parts from GF Piping System representative:
► Valve type and DN according to type plate.
► Gasket material according to color of grid element.
► Designation of the spare part (according to chapter „Design").
► Spare part quantities.
CAUTION!
Do not make any changes to the product!
Material damage and/or risk of injury due to modifications to the product or incompatible spare parts.
► Secure the system/device against unintentional operation.
► Do not use defective spare parts.
CAUTION!
Incorrect spare parts!
When replacing, only original Georg Fischer Piping Systems spare parts intended for the valve type may be used.
► Use only original spare parts from Georg Fischer Piping Systems with the specifications according to the type plate.
10.1

Accessories

Designation
Hook wrench
Manometer adaptor
Manometer brass
Manometer stainless steel
Manometer sealing plug
11

Disposal

► Before disposing of the different materials, separate them into recyclables, normal waste and special waste.
► Comply with local legal regulations and provisions when recycling or disposing of the product, the individual components and
the packaging.
► Observe country-specific regulations, standards and guidelines.
WARNING!
Contaminated components!
Parts of the product may be contaminated with medium that are harmful to health and the environment meaning that simple cleaning
is not sufficient! Risk of personal injury and damage to the environment caused by these medium. Before disposing of the product:
► Collect leaking medium and dispose of in accordance with local regulations.
► Consult the safety data sheet of the medium used.
► Neutralize any medium residues in the product.
► Separation and disposal of materials (plastics, metals, etc.) according to local regulations.
30
DN 10/15
198 806 451
Article number
DN 20/25
198 806 452
198 806 650
198 806 651
198 806 652
198 806 653
Operating Instructions
DN 32/40/50
198 806 453