Description; Products; Mounting Instructions - CombiSteel 7178.0510 Betriebs- Und Wartungsanleitung

CODE
7178.0080 Gas fryer on countertop, 8 litres
7178.0085 Gas fryer on countertop, 2x8 litres
7178.0510 Gas fryer on closed cabinet, 15 litres
7178.0515 Gas fryer on closed cabinet, 2x15 litres
7178.3045 Gas fryer on closed cabinet, 19 litres
7178.3050 Gas fryer on closed cabinet, 2x19 litres
Placement
 Installation and adjustment of the device should be carried out by technical staff of the
Authorized Service.
 Place the device beneath a filtered exhaust hood in order to eliminate smell and fume
that may be emitted during cooking.
 Place the device at a place min. 10cm away from the side or back wall to prevent
excessive temperature rises.
 Device should be placed on a flat surface by suitably balancing on the four adjustable
legs. (Figure A)
 Remove the protective nylon on the device. Clean the adhesive particles left on the
device with a suitable cleaner.
 Never leave flammable material near the device.
 The device should be used in a well-ventilated area.
Gas Connection
 Have the gas connection of the device carried out by an authorized service employee.
 Device should be connected in accordance with the national and local gas standards of
the relevant country.
 Gas inlets of the device are indicated with
 Connection to the gas installation should be made with flex pipe and ball valve. Fix the
said ball valve to a place that is away from heat and easily accessible in case of a danger.
 After gas inlet connection is completed, check for possible gas leakages through leakage
detection device or soapy water.
 Feed the device with the gas and pressure as specified on device information plate and
adjusted. If the gas type to which the device was adjusted for is not suitable to the gas
type at the mounted place, follow the instructions written below.
B. PRODUCTS
C. MOUNTING INSTRUCTION

DESCRIPTION

GAS label on device body.
'' ''
5
SERIE
600
600
700
700
900
900