Install Battery - HIKMICRO FALCON Serie Kurzanleitung

Zoom
Capture + Menu Press to capture snapshots.
+

2. Install Battery

Steps
1. Push the lock catch to unclock the battery compartment cover, as the arrows indicate.
2. Open the cover and insert the battery as the positive and negative marks indicate.
3. Close the battery compartment cover and lock it.
Notes:
 Take the battery away if you do not use the device for a long time.
 The battery type is 18650 with the protection board, and the battery size should be within 19 mm × 70 mm.
The rated voltage and capacity are 3.6 VDC/3.35 Ah (12.06 Wh).
 Please purchase the batteries recommended by the manufacturer if necessary.
Press: Switch digital zoom | Hold: Correct non-uniformity of display (FFC)
2