2.
Balance display
(example)
7.5 Backlight of the display (only "L" models)
The balance has the ability to turn the backlight of the display on or off.
For this purpose press
FOB-N-BA-e-1611
Operation
Start balance by pressing
The balance will carry out a self-test.
Wait for „0" display
Press
, "HOLD" will appear and a small
triangle flashes. During this time put samples to be
weighed in place.
The stability display will appear after a short time,
the triangle will stop flashing and the obtained
weight value is displayed.
By pressing
mode. The triangle disappears.
for approx. 3 sec.
.
the balance returns to weighing
19