Initial Use - Beurer HA 50 Gebrauchsanweisung

6. Initial use

Remove the hearing amplifier from the packaging and check that the device
and all accessories are included and not damaged.
1. Open the battery compartment on the hearing amplifier as
shown.
2. Remove the protective film from the button cell battery
included in delivery (type 13/PR48) and insert the battery
into the battery compartment as shown after 10 to 15 min-
utes. When inserting the battery, ensure that the correct
polarity (+/-) is observed.
3. Close the battery compartment again. Now connect your
desired earplug to the earpiece.
Make sure the volume control is initially set to the low-
est setting before operating the hearing amplifier.
40