Respekta CH 11050 IS Bedienungs- & Installationsanleitung Seite 39

1. 1. Use the enclosed drilling template and mark the 8 drill
A
holes for the mounting plate (B) with a pencil on the
suspended ceiling.
2. Lightly pierce the points for the 8 screws (B) with an eel.
B
3. Then follow the installation steps 4. to 13. in the above section "Mounting the extractor hood on
a concrete ceiling" . However, please note that the mounting plate must be fastened with 8 screws
on a wooden ceil.
17
fi220301ATL