C - Replacing The Brush; D - Replacing The Pad Holder - IPC SD13 Gebrauch Und Wartung

OPERATIONS TO BE
CARRIED OUT AS
REQUIRED

7.1.c - Replacing the brush

It becomes necessary to replace the brush
due to wear when the bristles are less than
2 cm long or if it needs to be changed due
to the type of floor to be washed. Refer to
the "Assembling the brush" paragraph for in-
structions.

7.1.d - Replacing the pad holder

It becomes necessary to replace the pad
holder due to wear when it is less than 10
mm high, or if it needs to be changed due
to the type of floor to be polished or sanded.
Refer to the "Assembling the pad holder"
paragraph for instructions.
ENGLISH - 9