Preparing Charger For Use; Assembling The Charger; Charging The Battery, Leds; Mounting The Charger On A Wall - Stihl AL 301 Gebrauchsanleitung

English
4.8 Transporting
WARNING
■ The charger can turn over or move while being
transported. This may result in personal inju‐
ries and damage to property.
► Disconnect the plug from the wall outlet.
► Remove the battery.
► Secure the charger with lashing straps,
belts or a net to prevent it turning over and
moving.
■ The connecting cable must not be used for
carrying the charger. The connecting cable
and the charger may be damaged.
► Wind up the connecting cable and attach it
to the charger.
4.9 Storage
WARNING
■ Children are not aware of and cannot assess
the dangers of a charger. Children can be seri‐
ously injured or killed.
► Disconnect the plug from the wall outlet.
► Store the charger out of reach of children.
■ The charger is not protected against all ambi‐
ent conditions. If the charger is exposed to
certain ambient conditions, the charger may
be damaged.
► Disconnect the plug from the wall outlet.
► If the charger is hot: Allow the charger to
cool down.
► Store the charger in a clean, dry place.
► Store the charger in an enclosed room.
► Do not store the charger outside of the
specified temperature limits,
■ The connecting cable should not be used for
carrying the charger or hanging up the
charger. The connecting cable and the
charger may be damaged.
► Hold the charger by the housing in a secure
grip. The charger is provided with a handle
recess to make it easy to pick up the
charger.
► Hang the charger on the wall mounting.
4.10 Cleaning, Maintenance and
Repair
WARNING
■ Harsh detergents, cleaning with a water jet or
sharp objects can damage the charger. If the
charger is not cleaned correctly, components
may no longer function properly or safety devi‐
14
ces may be rendered inoperative. They may
cause serious injury to persons.
► Clean the charger as described in this User
■ If the charger is not serviced or repaired cor‐
rectly, components may no longer function
properly or safety devices may be rendered
inoperative. This may result in serous or fatal
injury to people.
► Do not attempt to service or repair the
■ If the connecting cable is faulty or damaged:
► Have the connecting cable replaced by a
5
5.1
The following steps must be performed before
commencing work:
► If the connecting cable is pluggable:
► Fit the connecting cable,
► Make sure the charger is in a safe condition,
► Clean the charger,
► If you cannot carry out this work: Do not use
the charger and contact your STIHL author‐
ized dealer.
6
6.1
13.3.
► If the connecting cable is pluggable: Insert the
cable plug (1) in the socket (2).
7
7.1
The charger can be mounted on a wall.

5 Preparing Charger for Use

Manual.
charger.
STIHL dealer.
Preparing Charger for Use
Preparing the Charger for Use
4.5.
10.1.

Assembling the charger

Attaching the connecting cable

Charging the Battery, LEDs

Mounting the Charger on a
Wall
6.1.
2 1
0458-010-9921-B