Filling The Clean-Water Tank; Fill Level Indicator; Füllen Des Frischwassertanks - Numatic TTB-1840 Originalanleitung

Filling the clean-water tank

The TTB 1840 is equipped with a large 15 litre clean-water tank allowing large areas to be cleaning in a single fill.
Note.
Great care must be taken to ensure that contaminants (leaves,hair, dirt, etc) are not allowed to enter the
clean-water during the filling process.
If using a bucket or similar, ensure it is always clean and free from debris.

Fill Level Indicator

Fill the clean water tank to a maximum of 18 litres, including cleaning chemicals if required.
Follow chemical manufacturing guide lines.
This allows the machine to be tipped back and moved without spillage (see page 28).
Use the fill indicator
(Fig 12).
Machine Set-Up
To fill the clean-water tank, remove the filler cap (Fig 10).
Fig 10
Fill using either a hose, bucket or a suitable container. (Fig 11).
Fig 11
Fig 12
Showing the clean-water tank empty
233970 (Page 24) 10/11 (A13)
Fig 13
(Fig 13).
Showing the clean-water tank full
(Fig 13a).
Fig 13a