Quick Set Up Guide; Schnellanleitung - Numatic TTB-1840 Originalanleitung

!
After the removal of all the packaging, carefully open and check the contents.
1
Fig 1
2
3
4
5
Quick Set-Up Guide
PLEASE READ BEFORE COMMENCING ANY OPERATION.
Ensure the Batteries are charged before use.
Fig 2
Fig 3
Fig 4
Fig 5
Fig 5a
233970 (Page 20) 10/11 (A13)
Using the handle position lever, move the handle into the
upright position. (Fig 1).
Fit the Brush / Pad (Fig 2).
Swing the floor-tool carrier from behind the brush. (Fig 3).
Using the two locking knobs fitted to the floor-tool, secure to
the floor-tool to the floor-tool carrier. (Fig 4).
Fit the battery to the machine (Fig 5) and plug in the power
supply. (Fig 5a). Ensure the battery has been charged before
use.
Fill the clean-water to a Max of 18 litres
For operation and cleaning
(see page 24)
controls (see page 30)
!