Kurze Beschreibung - HIKMICRO B Serie Kurzanleitung

● Make sure the plug is properly connected to the
power socket.
● When the device is powered off and the RTC
battery is full, the time settings can be kept for
4 months.
● Before the first use, charge the lithium battery
for more than 8 hours.
Maintenance
● If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
maintenance.
● Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
● If the equipment is used in a manner not
specified by the manufacturer, the protection
provided by the device may be impaired.
● Your camera will periodically perform a
self-calibration to optimize image quality and
measurement accuracy. In this process the image
will pause briefly and you will hear a "click" as a
shutter moves in front of the detector. The
self-calibration will be more frequent during the
startup or in very cold or hot environments. This
is a normal part of operation to ensure optimum
performance for your camera.
Calibration Service
● We recommend you send the device back for
calibration once a year, and please contact the
local dealer for the information on maintenance
points. For more detailed calibration services,
please visit
https://www.hikmicrotech.com/en/support/cali
bration-service.html.
Using Environment
● Make sure the running environment meets the
requirement of the device. The operating
temperature shall be -10°C to 50°C (14°F to
122°F), humidity shall be 90% or less, and height
≤ 5000 m.
● Place the device in a dry and well-ventilated
environment.
● DO NOT expose the device to high
electromagnetic radiation or dusty
environments.
● DO NOT aim the lens at the sun or any other
bright light.
● When any laser equipment is in use, make sure
that the device lens is not exposed to the laser
beam, or it may burn out.
Technical support
● https://www.hikmicrotech.com/en/contact-us.ht
ml will help you as a HIKMICRO customer to get
the most out of your HIKMICRO products. The
portal gives you access to our support team,
software and documentation, service contacts,
etc.
Emergency
● If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the
power cable, and contact the service center.
Laser
Warning: The laser radiation emitted from the
device can cause eye injuries,
burning of skin or inflammable
substances. Prevent eyes from
direct laser. Before enabling the
Light Supplement function, make sure no human or
inflammable substances are in front of the laser
lens. The wave length is 650 nm, and the power is
less than 1 mW. The laser meets the
IEC60825-1:2014 standard.
Laser maintenance: It is not necessary to maintain
the laser regularly. If the laser does not work, the
laser assembly needs to be replaced in the factory
under warranty. Keep the device power off when
replacing laser assembly. Caution-Use of controls or
adjustments or performance of procedures other
than those specified herein may result in hazardous
radiation exposure.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road,
Xixing Subdistrict, Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products
might be subject to export controls in various
countries or regions, including without limitation,
the United States, European Union, United Kingdom
and/or other member countries of the Wassenaar
Arrangement. Please consult your professional legal
or compliance expert or local government
authorities for any necessary export license
requirements if you intend to transfer, export,
re-export the thermal series products between
different countries.

1. Kurze Beschreibung

Die tragbare Wärmebildkamera ist eine Kamera zur
Aufnahme von Wärmebildern. Der integrierte
hochempfindliche IR-Detektor und
Hochleistungssensor erfassen
Temperaturänderungen und messen die
Temperatur in Echtzeit.
Sie können auf Ihrem Handy über die HIKMICRO
Viewer-App die Live-Ansicht anzeigen, Fotos
erfassen und Videos aufnehmen. Sie können auch
über die App radiometrische Bilder analysieren
sowie einen Bericht erstellen und freigeben.
Scannen Sie die QR-Codes, um die App
herunterzuladen.
Sie können sich den HIKMICRO Analyzer
(https://www.hikmicrotech.com/en/industrial-prod
ucts/hikmicro-analyzer-software.html)
herunterladen, um Bilder professionell offline zu
analysieren und auf Ihrem PC einen Bericht in
einem individuellen Format zu erstellen.
5
Deutsch