Kurze Beschreibung; Sie Können Sich Den Hikmicro Analyzer; Deutsch - HIKMICRO E Serie Kurzanleitung

● For long-term storage of the battery, make sure it
is fully charged every half year to ensure the
battery quality. Otherwise, damage may occur.
● Make sure the plug is properly connected to the
power socket.
● When the device is powered off and the battery is
full, the time settings can be kept for 60 days.
● The standard adapter power supply is 5 V.
● The battery is certified by UL2054.
Maintenance
● If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
maintenance.
● Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
● If the equipment is used in a manner not
specified by the manufacturer, the protection
provided by the device may be impaired.
● We recommend you send the device back for
calibration once a year, and please contact the
local dealer for the information on
maintenance points.
● Your camera will periodically perform a
self-calibration to optimize image quality and
measurement accuracy. In this process the
image will pause briefly and you'll hear a "click"
as a shutter moves in front of the detector.
The self-calibration will be more frequent
during start up or in very cold or hot
environments. This is a normal part of
operation to ensure optimum performance for
your camera.
Calibration Service
We recommend you send the device back for
calibration once a year, and please contact the
local dealer for the information on maintenance
points. For more detailed calibration services,
please visit
https://www.hikmicrotech.com/en/support/calib
ration-service.html.
Using Environment
● Make sure the running environment meets the
requirement of the device. The operating
temperature shall be -10 °C to 50 °C (14 °F to
122 °F), and humidity shall be 95% or less.
● Place the device in a dry and well-ventilated
environment.
● DO NOT expose the device to high
electromagnetic radiation or dusty environments.
● DO NOT aim the lens at the sun or any other
bright light.
Das Erscheinungsbild des Produkts dient nur als Referenz und kann vom
tatsächlichen Produkt abweichen.

1. Kurze Beschreibung

Die tragbare Wärmebildkamera ist eine Kamera mit Wärmebildern. Der
integrierte hochempfindliche IR-Detektor und Hochleistungssensor
erfassen Temperaturänderungen und messen die Temperatur in Echtzeit.
Sie können sich den HIKMICRO Analyzer
(https://www.hikmicrotech.com/en/industrial-products/hikmicro-analyzer
● When any laser equipment is in use, make sure
that the device lens is not exposed to the laser
beam, or it may burn out.
● The device is suitable for indoor and outdoor uses,
but do not expose it in wet conditions.
● The level of protection is IP 54.
● The pollution degree is 2.
Technical support.
● The
https://www.hikmicrotech.com/en/contact-us.ht
ml portal will help you as a HIKMICRO customer to
get the most out of your HIKMICRO products. The
portal gives you access to our support team,
software and documentation, service contacts,
etc.
Emergency
● If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the
power cable, and contact the service center.
Laser Light Supplement Warning
Before enabling the Light Supplement function,
make sure no human or inflammable substances are
in front of the laser lens. The wave length is 650 nm,
and the power is less than 1 mW. The laser meets
the IEC60825-1:2014 standard.
Laser maintenance: It is not necessary to maintain
the laser regularly. If the laser does not work, the
laser assembly needs to be replaced in the factory
under warranty. Keep the device power off when
replacing laser assembly. Caution-Use of controls or
adjustments or performance of procedures other
than those specified herein may result in hazardous
radiation exposure.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road,
Xixing Subdistrict, Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products
might be subject to export controls in various
countries or regions, including without limitation,
the United States, European Union, United Kingdom
and/or other member countries of the Wassenaar
Arrangement. Please consult your professional legal
or compliance expert or local government
authorities for any necessary export license
requirements if you intend to transfer, export,
re-export the thermal series products between
different countries.
5
Warning: The laser radiation
emitted from the device can
cause eye injuries, burning of
skin or inflammable substances.
Prevent eyes from direct laser.

Deutsch