Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
carriers to the cooking panels.
Place a paper between the upper cover
and cooking panel, cover the upper co-
ver, than tape to the side surfaces of
oven.
Tape carboard or paper onto the front
cover on interior glass of oven as it will
be suitable to the trays, for the wire grill
and trays in your oven not damage to
the oven's cover during transport. Also
tape the oven's covers to the side walls.
If does not have the original case :
Take measure for external surfaces
(glass and paintes surfaces) of oven
against possible blows.
The EasyFix Wire Rack
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
5
4
3
2
1
•
Insert the accessory to the correct
position inside the oven.
•
Allow at least a 1 cm space between the
fan cover and accessories.
•
Take care removing cookware and/or
accessories out of the oven. Hot meals
or accessories can cause burns.
•
The accessories may deform with heat.
Once they have cooled down, they will
recover their original appearance and
performance.
•
Trays and wire grids can be positioned
on any level from 1 to 5.
•
Telescopic rails can be positioned on
levels T1, T2, 3, 4, 5.
•
Level 3 is recommended for single level
cooking.
•
Level T2 is recommended for single
level cooking with the telescopic rails.
•
The turnspit wire grid must be
positioned on Level 3.
•
Level T2 is used for the turnspit wire
grid positioning with telescopic rails.
****Accessories may vary depending on the
model purchased.
EN - 19
T2
T1
Werbung
Inhaltsverzeichnis
