Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
START
Testing
1.
Clean the parts of the freezer with lukewarm water containing a little
neutral detergent and wipe them dry.
Note!
• Electrical components should only be wiped with a dry cloth.
2.
Turn the thermostat knob to the "2" position and then plug the freezer
into the wall outlet. The compressor will begin to run.
3.
Check, after 30 minutes of operation, to ensure that the freezer is cold.
Temperature Control
1.
The temperature control is located near the top of the unit. You turn it
using a coin.
2.
Turning the thermostat knob adjusts the temperature of the freezer.
3.
The marks on the knob represent different settings. Setting "1" is the
warmest and setting "4" is the coldest.
4.
The factory recommended setting is "2" for normal
operating conditions.
34
Werbung
Inhaltsverzeichnis
Fehlerbehebung
