Assembling The Seat - Sunny Health & Fitness SF-B1709 Bedienungsanleitung

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at
8669).
Figure 1
Figure 3
support@sunnyhealthfitness.com
Figure 2
STEP 3:
Insert the Seat Post (No. 18) into the Main Frame
(No. 1). Set Seat Post (No. 18) at desired height.
Insert Spring Knob (No. 13) and tighten to secure.
Insert the Seat Slider (No. 20) into the Seat Post
(No. 18). Set Seat Slider (No. 20) at desired
position. Insert Spring Knob (No. 13) and tighten to
secure.

ASSEMBLING THE SEAT

1. Use Wrench (No. 89) to loosen the 2 Nuts (No.
B & No. C) on the Seat (No. 21). The round side
of the Seat Clamp (No. A) should be horizontal
and on the bottom. If it is not on the bottom, turn
the Seat Clamp (No. A), so the round side is on
the bottom. If the Seat Clamp (No. A) does not
fit on the Seat Slider (No. 20), loosen the 2 Nuts
(No. B & No. C) some more. (Figure 1)
2. Slide the Seat (No. 21) onto the Seat Slider (No.
20). The points on the front edge of the Seat
Clamp (No. A) will go into the Indentations (No.
D) on the Seat Slider (No. 20), and the V-shaped
stopper at the end of the Seat Clamp (No. A) will
be in contact with the back edge of the Seat
Slider (No. 20). (Figure 2)
3. Use Wrench (No. 89) to tighten the 2 Nuts (No.
B & No. C) on the Seat (No. 21). Adjust the Seat
(No. 21) so that it is leveled and not tilted forward
or backward. Continue tightening the 2 Nuts (No.
B & No. C).
4. Use your hand to try to move the Seat (No. 21)
forward, backward, and side to side to test if it is
secure. If the Seat (No. 21) moves, tighten the
Nuts (No. B & No. C) until the Seat (No. 21)
does not move. (Figure 3).
19
or 1-877-90SUNNY (877-907-