Troubleshooting - Powerfix Profi HG04213B Bedienungs- Und Sicherheitshinweise

All manuals and user guides at all-guides.com
and press the reset button situated on the back-
side of the product using a sharp object. If the dis-
played reading is still not right, press the reset
button again to calibrate again.
Note: Do not remove the batteries while using
RESET function.

Troubleshooting

Error Possible causes and
solutions
The measure- Check whether the product is
ment is obvi- set to the correct material.
ously too high Check if the measuring pins
or low. are correctly pressed against
the material.
Repeat the measurement process.
The measurement range has
The display
8
been exceeded or you have
is reading
not reached the measuring
'Lo' or 'Hi'.
range.
The number Is the lock key on the display?
on the display Press the
is not reacting.
You can The batteries are low.
barely see the See the chapter 'Inserting/
number on the changing the batteries'.
display.
Electrostatic discharges can lead to malfunctions.
In the event of such malfunctions, remove the
batteries briefly and reinsert them.
2
button .
4
GB 15