Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. OPERATING INSTRUCTIONS
See figure 4 on page 3.
3.1 OPERATING VIA REMOTE CONTROL
See the remote control buttons in figure F4 on page 3.
POWER LEVELS
1.
Point the remote control towards the receiver whilst using it.
Remote control will not work from a distance when strong lighting or sunlight is
present. In this case, use the remote control just in front of the control panel.
2.
When you select a function with the remote control you will hear a 'beep'.
3.
To turn on or off your heater press the on-off button
4.
To select heating level press the buttons between P+ to P- as per your requirement.
5.
To direct turn on power level P5, the "Max" button can be pressed.
TIMER FUNCTION
1.
Press the T+ or T- button to start the timer function. In the display it shows H1 to H9
(H1 = 1 hour before the appliance automatic shutts off, H2 = 2 hours etc...)
2.
When the timer is activated, a "dot" is shown besides the power indicator.
3.
To cancell the timer press on-off.
Use two AAA batteries in your remote control .When the remote control is not used for a
long period, please remove the batteries to avoid leakage and damage.
Do not allow water or liquid to get into the remote control.
4. TERMS OF WARRANTY
Warranty by Opranic does not cover the defects arising out of improper use of the
appliance. The warranty does not cover the situations below:
• The damages and defects arising out of improper use.
• The damages and defects having occurred during the transportation after the delivery of
the product to the customer by the company.
• The damages and defects arising out of low or excessive voltage, ungrounded plug
usage, faulty electricity systems, operating the appliance in different voltage values other
than specified in the instructions.
• The damages and defects arising out of fire and lightening.
• The damages and defects arising out of repairs and maintenance by persons other than
Authorized Services.
• The defects arising out of the breach of the instructions in the manual.
• Damages and defects that happen due to shipping for repair.
Attention! Faulty maintenance and cleaning are not covered by the warranty.
• The dust and polluters in the environment.
• Damage in the reflector or filament due to faulty cleaning.
• Faulty installation or dismantlement.
• Operating with damaged filament, frame or power cord.
Above mentioned defects and services are not covered by the warranty.
8
EN
Werbung
Inhaltsverzeichnis
