Operating Instructions; Thermostatic Versions; Remote Controlled Versions - Opranic Nova Series Benutzerhandbuch

3. OPERATING INSTRUCTIONS

See figure 4 on page 3.

3.1 THERMOSTATIC VERSIONS

Models marked with "T" in the model description:
Thermostat levels can be adjusted according to your comfort. The thermostat switches
the power on and off in cycles depending on the temperature of the body of the heater and
prefered level setting.
The heater operates constantly when the thermostat is at the highest level. You may
reduce the energy consumption by adjusting the thermostat according to your comfort.
Switching OFF: The appliance must be switched off when the appliance is not operated for
long a term, during cleaning, when maintenance is conducted or when the location of the
heater is changed. The electricity connection is turned off by unplugging the power cord
and adjusting the thermostat in "0" mode.

3.2 REMOTE CONTROLLED VERSIONS

Models marked with "R" in the model description:
1. Point the remote control towards the receiver whilst using it.
Remote control will not work from a distance when strong lighting or sunlight is present.
In this case, use the remote control just in front of the control panel.
2. When you select a function with the remote control you will hear a 'beep'.
3. To turn on or off your heater press red button
4. To select heating level press the buttons between 1-5 as per your requirement.
Use two AAA batteries in your remote control .When the remote control is not used for a
long period, please remove the batteries to avoid leakage and damage.
Do not allow water or liquid to get into the remote control.
8
EN