Operating Instructions; On/Off Versions; Remote Controlled Versions - Opranic Thor-Series Benutzerhandbuch

3. OPERATING INSTRUCTIONS

See figure F4 on page 2.

3.1 ON/OFF VERSIONS

Models marked with "P" in the model description.
Switching ON
Turn the wheel to "1", the appliance is now on and will reach full power in 1 minute.
Switching OFF
Turn the wheel to "0" the appliance is now off. When the appliance is not operated for
long a term, cleaning or maintenance is conducted or when the location of the heater is
changed, the electricity connection is turned off unplugging the power cord and adjusting
the wheel to "0" mode.

3.2 REMOTE CONTROLLED VERSIONS

Models marked with "R" in the model description
1. Point the remote control towards the receiver whilst using it.
Remote control will not work from a distance when strong lighting or sunlight is
present. In this case, use the remote control just in front of the control panel.
2. When you select a function with the remote control you will hear a 'beep'.
3. To turn on or off your heater press red button
4. To select heating level press the buttons between 1-5 as per your requirement.
Use two AAA batteries in your remote control .When the remote control is not used for a
long period, please remove the batteries to avoid leakage and damage.
Do not allow water or liquid to get into the remote control.
8
EN