Connecting Cables And Changing The Settings - Samsung SCC-B535 Serie Bedienungsanleitung

❚
Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.
To adjust the lens focus, zoom, and function settings
1. Remove the Cover dome and Inner cover. For more details about the removing procedures,
2. Adjust the focus, zoom, and function settings of your camera using the Focus lever, Zoom
3. If you want to fix the adjusted focus and zoom, screw up the levers.
10
AB68-00648D(03)Eng.indd
All manuals and user guides at all-guides.com

Connecting cables and changing the settings

see "Installation procedure," in the Installing camera section on the next page.
lever, and Switch board while you are viewing the image on the screen.
10
Monitor
BNC Cable
To connect cables
1. Connect the BNC cable
to the Video connector
attached on your camera.
2. Connect the BNC cable
to the Video Input on a
monitor.
3. Connect the power adapter
to the Power connector
attached on your camera.
When the monitor is turned
on, the camera image
appears.
2007-05-14 ｿﾀﾈﾄ 6:55