Location Of The Connection Points - Siemens 7XV5654-0BA00 Bedienungsanleitung

English

Location of the connection points

R1 R2
Sync-Transceiver
SERIES: A4-K7-655430
X1
X1
Fig. 12: Location of the connection points
Screw terminals X2, X5
Connection
X2
X7
Tab. 1: Screw terminals X2, X7
Fiber optic connectors R1 und R2
The fiber optic inputs (receivers) are signed as R1 and R2 (see Fig. 4).
Please note: The ST plugs are to be shifted with the lateral nose into the groove of the
device connection and locked afterwards through a short right turning. During the
installation of the FO - cables the bending radius specified for the cable is to be kept.
54 / 68
X6
1 2
K 2
7XV5654-0BA00
C E
24-250V DC
U H
60-230V AC
M 1
2 1 N/L-
X7
Meaning
Power supply U
Alarm contact M1
X5
1 2
R1/R2:
BI 2
X1:
X2:
5
5
X7:
X5:
U H
X6:
L1/L+
X2
H
7XV5654-0BA00
Fiber optic inputs (ST)
Two 24 V outputs at a
9 pol. Sub-D socket
Terminals for the auxiliary
voltage (power supply)
Alarm contact
Binary input
Sync-output with electronic
relay contact
Symbol
DC: L+ AC: L
DC: L- AC: N
1, 2
C53000-B1174-C168-2