Seite 1
® SICLOCK DCFRS Industrieversion mit TTY-Interface 2XV9450-1AR21 Betriebsanleitung • User Manual Deutsch Version 1.0 Stand: Oktober 2005 English Bestell.Nr. 2XV9450-1AR48...
Betriebsanleitung SICLOCK DCFRS Industrieversion 1 Lieferumfang Im Lieferumfang von SICLOCK DCFRS Industrieversion (Best.Nr. 2XV9450-1AR21) sind folgende Komponenten enthalten: • SICLOCK DCF77-Antenne mit TTY-Interface (Best.Nr. 2XV9450-1AR16 oder E89700-B9204-A1) • Montagehalterung mit 2 Verteilerdosen (1 Verteilerdose bei Lieferung zusammen mit SICLOCK TM).
Betriebsanleitung SICLOCK DCFRS Industrieversion 2.2 Anschluss 2.2.1 Zielsystem Die Schnittstelle zwischen dem Zielsystem und der Antenne bildet der TTY-RS232-Umsetzer. Er wird mit dem Zielsystem über eine RS232-Schnittstelle verbunden. Das andere Kabelende ist aufgesplittet, die 4 Adern sind mit Aderendhülsen versehen. An die weiße und die braune Ader wird das mitgelieferte Steckernetzteil (14V AC) angeschlossen.
Betriebsanleitung SICLOCK DCFRS Industrieversion 2.3.3 Zusammenbau der Montagehalterung Die Abbildungen 2 und 3 zeigen die zwei Zusammenbaumöglichkeiten für die Montagehalterung. Dabei ist zu beachten, daß das Anschlusskabel der Antenne (1) durch den Montagewürfel (3) und das Montagegestell (4) geführt und durch die Nut an der Bodenplatte nach außen verlegt wird. Nach dem Überprüfen des Empfangsstandortes (Empfangsgerät synchronisiert auf die Uhrzeit auf) wird die...
5 Antennenfußgestell-Vermaßung Abbildung 4: Abmessungen des Antennenfußgestells Die Befestigung des Antennenfußgestells erfolgt mit 4 Senkkopfschrauben 5 mm. Die Warenzeichen SICLOCK, DCFRS der SIEMENS AG sind durch Eintrag gesetzlich geschützt. Technische Änderungen des Produkts vorbehalten. Diese Beschreibung gilt nicht als Zusicherung von Eigenschaften.
Seite 9
® SICLOCK DCFRS Industrial Version with TTY Interface 2XV9450-1AR21 User Manual Version 1.0 Revision: October 2005 Order No. 2XV9450-1AR48...
Seite 10
User Manual SICLOCK DCFRS Industrial Version Responsible Distributor: Siemens AG, I&S EDM, Erlangen Contact Person: local SIEMENS branch Orders: local SIEMENS branch Published by: Siemens AG I&S EDM Frauenauracher Straße 98 D-91056 Erlangen SICLOCK-Hotline: Phone: ++49 (9131) 7-2 88 66...
Seite 11
User Manual SICLOCK DCFRS Industrial Version Contents 1 Scope of Delivery..........................4 2 Commissioning ............................. 4 2.1 Description of Function ........................4 2.2.1 Target System ......................... 5 2.2.2 Antenna ........................... 5 2.2.3 Cable Shield ..........................5 2.3 Mounting ............................5 2.3.1 Choice of Location........................
2.1 Description of Function The SICLOCK DCFRS antenna serves the reception of the DCF77 time signal transmitter for the transmission of the official time of day in the Federal Republic of Germany. The transmitter in Mainflingen near Frankfurt transmits at minute intervals the current date and absolute time on the long wave frequency 77.5 kHz.
User Manual SICLOCK DCFRS Industrial Version 2.2 Connection 2.2.1 Target System The interface between the target system and the antenna is provided by the TTY-RS232 converter. It is connected to the target system via a RS232 interface. The other end of the cable is spit, the 4 wires are provided with wire end ferrules.
User Manual SICLOCK DCFRS Industrial Version 2.3.3 Assembly of the Antenna Frame The figures 2 and 3 show the two possible ways of assembling the antenna frame. It should be noted that the connection cable of the antenna (1) is led through the mounting cube (3) and the foot stand (4) and laid outwards through the groove on the floor plate.
Loop resistance: less than 150 Ohm. 4 Ordering data SICLOCK DCFRS industrial version (TTY interface) ..................2XV9450-1AR21 SICLOCK Operating manual for DCFRS industrial version (TTY interface) ............2XV9450-1AR48 SICLOCK DCFRS antenna with TTY interface ....................2XV9450-1AR16 SICLOCK Reception service for DCF77 for SIMATIC S7 AS300/AS400 ............2XV9450-1AR32 SICLOCK Installation manual for reception service for DCF77 for SIMATIC S7 AS300/AS400 ......2XV9450-1AR33...
User Manual SICLOCK DCFRS Industrial Version 5 Antenna Foot Stand Dimensioning Fig. 4: Dimensions of the antenna foot stand. The antenna foot stand is fixed in place by means of 4 countersunk screws 5 mm. SICLOCK, DCFRS, GPSDEC, are registered trademarks of SIEMENS AG.