Bosch Rexroth SD301 Bedienungsanleitung Seite 48

48/144 Bosch Rexroth AG
6 Menus when connecting the SD301 to a KE31x
6.3.1 SD301 configuration
Three parameters are set here (Fig. 45):
– Language (corresponding to the loaded
language pack)
– System display brightness
– Time until the screen saver mode is acti-
vated.
Fig. 45:
The language and brightness are selected by
touching the corresponding buttons. The cur-
rent setting is displayed inversely.
Touching the number field for time setting
opens the key pad (Fig. 46). The switch-off
time can be set in whole minutes between a
range of 1 to 60 minutes.
Fig. 46:
SD301 | 3 609 929 826/06.03
6.3.2 Power On Menu
Here you can set the current view as the start
menu. The following security question will ap-
pear (Fig. 47).
Fig. 47:
Touching OK saves the current view as the
start screen. Cancel closes this menu.
Not every view may be used as the start
screen. If you select one that cannot be used,
the following error message will appear
(Fig. 48).
Fig. 48:
The Power on menu can be called up from
every level by touching the
menu is not available, i.e. because the
SD301 has been connected to another com-
ponent, the component's Power on menu will
appear.
button. If the