Residual Risks; Symbol Explanation - Westfalia GM 2500/45 TS Originalanleitung

with the tip! Always observe the tip of the guide bar. Be
careful when resuming already started cuts.
- Start cutting with the saw chain running!
- Always sharpen the saw chain correctly.
- Never saw through more branches at once! When touching
make sure that no other branch is touched.
- When cutting to length, pay attention to closely adjacent
stems. If possible, use a sawhorse.

Residual Risks

▪ Even if you operate this power tool correctly, residual risks
always remain. The following hazards may occur in connec-
tion with the design and construction of this power tool:
- Injuries and property damage caused by flying parts.
- Ear damage if you do not wear suitable hearing protection or
use the power tool for a long period of time.
- Health damage resulting from hand-arm vibrations if the
power tool is used for an extended period of time or is not
properly managed and maintained.

Symbol Explanation

▪ Observe the Safety Notes
▪ Protect from moisture
▪ When the power cord is damaged, pull the plug from mains.
▪ Read instruction manual and follow the warnings.
▪ Wear goggles
▪ Wear hearing protection
▪ Noise Emission 107 dB
Safety Notes
13