Siemens SITRANS P DS III Kompaktbetriebsanleitung Seite 7

● Volume of flow
● Mass flow rate
The output signal is a load-independent direct current of 4 to 20 mA or a process-based, digital
PROFIBUS PA/FOUNDATION™ Fieldbus FF signal.
You can install the "intrinsically-safe" or "explosion-proof" version of the pressure transmitter in hazardous areas. The
devices have an EC type examination certificate and comply with the appropriate harmonized European CENELEC
directives.
Pressure transmitters with remote seals of various shapes can be provided for special applications. For example, measuring
high-viscosity substances is a special application.
Operate the device in accordance with the specifications in section Technical specifications (Page 36).
For additional information, please refer to the operating instructions for the device.
1.5 Checking the consignment
1. Check the packaging and the delivered items for visible damage.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for correctness and completeness.
WARNING
Using a damaged or incomplete device
Danger of explosion in hazardous areas.
Do not use damaged or incomplete devices.
•
SITRANS P DS III/P410 (7MF4.33.. 7MF4.34.. 7MF4.35..)
A5E03434626-04, 05/2015
5